Kontron KT965 Series - Manual (Page 67)

KT965 Family
KTD-00699-S Public User Manual Date: 2010-04-15 Page 67 of 90
BIOS SETUP UTILITY
Advanced
Primary IDE Master
Device :Hard Disk
Vendor :ST340014A
Size :40.0GB
LBA Mode :Supported
Block Mode :16Sectors
PIO Mode :4
Async DMA :MultiWord DMA-2
Ultra DMA :Ultra DMA-5
S.M.A.R.T. :Supported
Type [Auto]
LBA/Large Mode [Auto]
Block (Multi-Sector Transfer) [Auto]
PIO Mode [Auto]
DMA Mode [Auto]
S.M.A.R.T. [Auto]
32Bit Data Transfer [Disabled]
Select the type of
devices connected to
the system
<- Select Screen
|| Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.59+ (C)Copyright 1985-2005, American Megatrends, Inc.
Feature
Options Description
Type Not Installed
Auto
CDROM
ARMD
Select the type of device installed
LBA/Large Mode Disabled
Auto Enabling LBA causes Logical Block
Addressing to be used in place of Cylinders,
Heads, and Sectors.
Block (Multi-Sector Transfer) Disabled
Auto Select if the device should run in Block mode
PIO Mode
Auto
0
1
2
3
4
Selects the method for transferring the data
between the hard disk and system memory. The
Setup menu only lists those options supported
by the drive and platform.
DMA Mode Auto , SWDMA0,
SWDMA1, SWDMA2,
MWDMA0, MWDMA1,
MWDMA2, UDMA0,
UDMA1, UDMA2,
UDMA3, UDMA4,
UDMA5
Selects the Ultra DMA mode used for
moving data to/from the drive. Autotype the
drive to select the optimum transfer mode.
Note: To use UDMA Mode 2, 3, 4 and 5 with a
device, the harddisk cable used MUST be
UDMA66/100 cable (80-conductor cable).
S.M.A.R.T. Auto
Disabled
Enabled
Select if the Device should be monitoring itself
(Self-Monitoring, Analysis and Reporting
Technology System)
32Bit Data Transfer Disabled
Enabled
Select if the Device should be using 32Bit data
Transfer