Kontron KT965 Series - Manual (Page 7)

KT965 Family
KTD-00699-S Public User Manual Date: 2010-04-15 Page 7 of 90
1. Introduction
This manual describes the KT965/Flex, KT965/ATXP and KT965/ATXE boards made by KONTRON
Technology A/S. The boards will also be denoted KT965 family if no differentiation is required.
All boards are to be used with the Intel® Core™2 Quad, Intel® Core™2 Duo, Intel® Pentium® 4 and the
Intel® Celeron® D Processors.
These belong to the Intel Conroe and Cedar Mill processor families.
Use of this manual implies a basic knowledge of PC-AT hard- and software. This manual is focused on
describing the KT965 Board’s special features and is not intended to be a standard PC-AT textbook.
New users are recommended to study the short installation procedure stated in chapter 3 before switching-
on the power.
All configuration and setup of the CPU board is either done automatically or by the user in the CMOS setup
menus. Except for the CMOS Clear jumper, no jumper configuration is required.