Kontron KTQM67-mITX - Manual (Page 12)

KTQM67 Users Guide
KTD-N0819-K Page 12
Hardware
Monitor
Subsystem • Smart Fan control system, support Thermal® and Speed® cruise for two on-board
Fan connectors: CPU Fan (on-board) and System Fan (on-board)
• Smart Fan control system, support Speed® cruise for two off-board Fans
(Fan3/Fan4) via Feature Connector.
• Three thermal inputs: CPU Die temperature (precision +/- 3ºC), System
temperature (precision +/- 3ºC) and System Temperature External via Feature
Connector (precision +/- 1ºC).
• Voltage monitoring
• Intrusion (Case Open) detect input, (via Feature connector)
• Sleep S5# Indication, (via Feature connector)
• System Powergood Signal, (via Feature connector)
Power
Supply Unit
ATX/BTX (w. ATX+12V) PSU for full PCI/PCIe load.
Alternatively (mITX version only): +12V single supply via ATX+12V (4-pole) connector,
but with limitation to power load (especially +5V for USB).
Battery
Exchangeable 3.0V Lithium battery for on-board Real Time Clock and CMOS RAM.
Manufacturer Panasonic / Part-number CR-2032L/BN, CR2032N/BN or CR-2032L/BE.
Approximate 6.2 years retention.
Current draw is 4.1µA when PSU is disconnected and 0 µA in S0 – S5.
CAUTION: Danger of explosion if the battery is incorrectly replaced. Replace
only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
BIOS • Kontron Technology / AMI BIOS (EFI core version)
• Support for ACPI 3.0 ( Advanced Configuration and Power Interface), Plug & Play
o Suspend (S1 mode)
o Suspend To Ram (S3 mode)
o Suspend To Disk (S4 mode)
• “Always On” BIOS power setting
• RAID Support (RAID modes 0,1, 5 and 10)
Operating
Systems
Support • WinXP (32b + 64b *)
• Vista (32b * + 64b *)
• Windows 7 (32b + 64b *)
• Linux
• VxWorks
• Windows Server 2003 r2 (32b * + 64b *)
• Windows Server 2008 r2 (32b * + 64b *)
• WES7 (32b + 64b)
*= Out Of The Box installation test only.
System Specification