Kontron KTQ77-FLEX - Manual (Page 116)

KTQ77/Flex Users Guide
KTD-N0848-C Page 116
Function Selection Description
Graphics Turbo IMON
Current
31
Graphics turbo IMON current values supported
(14 – 31).
Primary Display
Auto
IGFX
PEG
PCI
Select which of IGFX/PEG/PCI Graphics device
should be Primary Display Or select SG for
Switchable Gfx.
Internal Graphics
Auto
Disabled
Enabled
Keep IGD enabled based on the setup options.
GTT Size
1MB
2MB
Select the GTT Size.
Aperture Size
128MB
256MB
512MB
Select the Aperture Size.
DVMT Pre-Allocated
32M, 64M,
96M,128M, 160M,
192M, 224M, 256M,
288M, 320M, 352M,
384M, 416M, 448M,
480M, 512M, 1024M
Select DVMT 5.0 Pre-Allocated (Fixed) Graphics
Memory size used by the Internal Graphics
Device.
DVMT Total Gfx Mem
128M
256M
MAX
Select DVMT 5.0 Total Graphics Memory size
used by the Internal Graphics Device.
Gfx Low Power Mode
Enabled
Disabled
This option is applicable for SSF only.
Graphics Performance
Analyzers Enabled
Disabled Enable or disable Intel Graphics Performance
Analyzers Counters.
BIOS - Chipset