Kontron CP6002 uEFI BIOS User Manual
User guide, Cp6002 uefi bios
Advertising
Table of contents
Document Outline
- Revision History
- Imprint
- Disclaimer
- Table of Contents
- 1. Starting uEFI BIOS Setup
- 2. Main Setup
- 3. Chipset Setup
- 4. Boot Setup
- 5. Security Setup
- 6. Save & Exit
- 6.1 Save Changes and Exit
- 6.2 Discard Changes and Exit
- 6.3 Save Changes and Reset
- 6.4 Discard Changes and Reset
- 6.5 Save Changes (Save Options)
- 6.6 Discard Changes (Save Options)
- 6.7 Restore Defaults (Save Options)
- 6.8 Save as User Defaults (Save Options)
- 6.9 Restore User Defaults (Save Options)
- 6.10 Boot Override
- 7. The uEFI Shell
- 7.1 Introduction, Basic Operation
- 7.2 Kontron Shell Commands
- 7.2.1 kBiosRevision uEFI Shell Command
- 7.2.2 kboardconfig uEFI Shell Command
- 7.2.3 kboardinfo uEFI Shell Command
- 7.2.4 kboot uEFI Shell Command
- 7.2.5 kbootnsh uEFI Shell Command
- 7.2.6 kclearnvram uEFI Shell Command
- 7.2.7 kclsp uEFI Shell Command
- 7.2.8 kipmi uEFI Shell Command
- 7.2.9 kmkramdisk uEFI Shell Command
- 7.2.10 kpassword uEFI Shell Command
- 7.2.11 kresetconfig uEFI Shell Command
- 7.2.12 kSettings uEFI Shell Command
- 7.2.13 kwdt uEFI Shell Command
- 7.3 uEFI Shell Scripting
- 8. Updating the uEFI BIOS