Kontron CP6002 uEFI BIOS - Manual (Page 33)

CP6002 uEFI BIOS Chipset Setup
ID 1039-1612, Rev. 2.0 Page 27
3.1.1.3 SATA Mode Selection RAID
This screen provides functions for enabling/disabling of the SATA controllers and for selecting
the operational mode if enabled.
The following screen indicates the functions available when the SATA controller is enabled and
the RAID mode is selected.
3.1.1.3.1 SATA Controller(s)
This function is used to enable or disable the onboard SATA controller.
Default setting: Enabled
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main Chipset Boot Security Save & Exit
SATA Controller(s) [Enabled]
SATA Mode Selection [RAID]
 Software Feature Mask Configuration
Serial ATA Port 0 Empty
Software Preserve Unknown
Serial ATA Port 1 Empty
Software Preserve Unknown
Serial ATA Port 2 Empty
Software Preserve Unknown
Hot Plug [Disabled]
Serial ATA Port 3 Empty
Software Preserve Unknown
Hot Plug [Disabled]
Serial ATA Port 4 INTEL SSDSA2SH (32.00)
Software Preserve SUPPORTED
Hot Plug [Disabled]
Serial ATA Port 5 Empty
Software Preserve Unknown
Hot Plug [Disabled]
 : Select Screen
 : Select Item
Enter: Select
+/-:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save
ESC: Exit
Version 2.01.1204. Copyright (C) 2010 American Megatrends, Inc.
SETTING DESCRIPTION
Disabled Use this setting to disable the SATA controller.
Enabled Use this setting to enable the SATA controller.