Kontron AM5020 IPMI Firmware - Manual (Page 17)

AM5020 IPMI Firmware
ID 1045-0205, Rev. 1.0 Page 9
P R E L I M I N A R Y
Reserve SEL 40.4 Storage 42h O / No
Get SEL Entry 40.5 Storage 43h O / No
Add SEL Entry 40.6 Storage 44h O / No
Partial Add SEL Entry 40.7 Storage 45h O / No
Delete SEL Entry 40.8 Storage 46h O / No
Clear SEL 40.9 Storage 47h O / No
Get SEL Time 40.10 Storage 48h O / No
Set SEL Time 40.11 Storage 49h O / No
Get Auxiliary Log Status 40.12 Storage 5Ah O / No
Set Auxiliary Log Status 40.13 Storage 5Bh O / No
LAN DEVICE COMMANDS O
Set LAN Configuration Parameters 23.1 Transport 01h O / Yes
Get LAN Configuration Parameters 23.2 Transport 02h O / No
Suspend BMC ARPs 23.3 Transport 03h O / Yes
Get IP/UDP/RMCP Statistics 23.4 Transport 04h O / Yes
SERIAL/MODEM DEVICE COMMANDS O
Set Serial/Modem Configuration 25.1 Transport 10h O / No
Get Serial/Modem Configuration 25.2 Transport 11h O / No
Set Serial/Modem Mux 25.3 Transport 12h O / No
Get TAP Response Codes 25.4 Transport 13h O / No
Set PPP UDP Proxy Transmit Data 25.5 Transport 14h O / No
Get PPP UDP Proxy Transmit Data 25.6 Transport 15h O / No
Send PPP UDP Proxy Packet 25.7 Transport 16h O / No
Get PPP UDP Proxy Receive Data 25.8 Transport 17h O / No
Serial/Modem Connection Active 25.9 Transport 18h O / No
Table 3: Standard IPMI Commands (Continued)
COMMAND
IPMI 2.0
SPEC.
SECTION
NETFN CMD
KONTRON
SUPPORT
ON MMC