Kontron MSM800XEL - Manual (Page 25)

MSM800XEV/XEL / Quick Start Guide
www.kontron.com 23
4.6 Power Up the Board
1. Check that the voltage is regulated to +5Volt and that the polarity is correct.
Attention! The supply voltage must be in the range of 4.9Volt to maximum 5.25Volt.
2. Switch on the connected monitor.
3. Switch on the external 5V power supply.
Attention! Jumper J1 determines the mode of the CompactFlash disk.
J1 – CF Master