7 bios setup, Bios setup – Kontron MSM800XEL User Manual
Page 28
MSM800XEV/XEL
/ Quick Start Guide
www.kontron.com
26
4.7 BIOS Setup
Since the BIOS is auto-configuring during the start-up procedure, the user normally does not enter the BIOS setup.
Manual setup is needed only to change the default settings. Please refer to the driver/software/BIOS manual printed
from the Product CD for the BIOS setup details.
Note:
For the MSM800SEL/XEL: The RTC clock and date must be adjusted in the BIOS setup after the external
battery is connected to the board.
4.8 Boot Up the Operating System and Install the Drivers
Depending on which boot drive is available, boot up the operating system from the CompactFlash, hard disk, or floppy
disk.
To install the drivers, see the BIOS/Driver/Software manual on the Product CD.