Citrix Systems Citrix MetaFrame Application for Windows 1.8 - Manual (Page 62)

 0HWD)UDPH $GPLQLVWUDWRUªV *XLGH
&RQILJXULQJ $V\QF 6HULDO &RQQHFWLRQV
The Device Connect On, Baud, Set Defaults, Advanced, and Test options are
only present for direct (null modem cable) serial connections. The options for
Async Transport Configuration include:
Option Description
Device The serial port associated with the connection.
Device Connect on Specifies the signal used to determine when the connection is
established and ready for user logon. Options include CTS, DSR,
RI, DCD, First Character, and Always Connected.
Baud Specifies the baud rate.
Set Defaults Resets the device settings to their default values.
Advanced Use the Advanced Async Configuration dialog box to configure
serial port options. See “Configuring Advanced Async Options”
below for more information.
Test Use the Async Test dialog box to test the serial port. You can
monitor the state of control signals, and transmit data to and
receive data from connected devices such as modems. See
“Testing Async Connections” below for more information.