Kontron CP3-SVE-M76AC - Manual (Page 5)

RID 24139 PD13, Rev. 01 Page 5
CPCI Power Supply PD13: CP3-SVE-M76AC
2.2 Power Supply Connectors
2.2.1 DIN M24/8 Power Supply Connector
Figure 2: Orientation of the DIN
M24/8 Power Supply Connector
The AC power input is via the front
panel connector. The
V
1
... V
3
output
voltages from the power supply unit
to the backplane are connected via a
32-pole DIN 24/8 male power supply
connector.
For the pinouts of the DIN M24/8
power supply connector please refer
to the following table.
Table 2: DIN M24/8 Connector Pinouts
PIN FUNCTION PIN FUNCTION
2 NC B.17 +3.3VL
5 NC B.18 +3.3VL
11 PE B.19 +12VL
A.13 NC B.20 NC
A.14 NC C.13 NC
A.15 NC C.14 NC
A.16 0VF C.15 NC
A.17 +5VF C.16 +3.3VL
A.18 +3.3VL C.17 +3.3VL
A.19 +12VL C.18 +3.3VL
A.20 NC C.19 +12VL
B.13 +3.3VL C.20 NC
B.14 +3.3VL 22 +5VL
B.15 +3.3VL 25 OVL
B.16 +3.3VL