Kontron CP-ADAP-P47-PB (6U) - Manual (Page 9)

CPCI Backplane PD17: CP-ADAP-P47-PB (6U)
RID 24229 PD17, Rev. 01 © 2003 PEP Modular Computers GmbH Page 9
4.5 System Monitor and Control Connector JP11
This backplane is provided with a connector for system monitor and control signal interfacing
to external devices. This is a 26-contact, male, double pin-row connector. The system manage-
ment bus (IPMB0), the power supply monitor and control signals, and push button reset
(PRST#) signal are all implemented on these connector.
Figure 7: Orientation and Pinout of the SMC Connectors JP11 and JP12
Note...
The signal pinout assignment is a function of the power supply actually utilized
with this backplane. Refer to the corresponding power supply documentation for
the applicable signal pinout.
1 13
b
a
JP11
Table 8: Pinout of Connector JP11
Pin
Function
Pin Row A Pin Row B
1 IMPB0_SCL GND
2 IMPB0_SDA IMPB0_PWR
3 N/C GND
4 N/C GND
5 N/C GND
6 INH# GND
7 FAL# DEG#
8 PRST# GND
9 GND V1 SENSE (+5V)
10 V2 SENSE (+3.3V) SENSE RTN
11 V3 SENSE (+12V) GND
12 V1 SHARE (+5V) V2 SHARE (+3.3V)
13 V3 SHARE (+12V) GND