Ktam3874/pitx user's guide – Kontron KTAM3874-pITX User Manual
Page 38
Advertising
KTD-S0051-D
Page 34
Digital I/O Interface
KTAM3874/pITX User's Guide
CAUTION!
Do not use signal voltages above 3.3V. All I/O signals are unprotected against overvoltage.
Note:
1)
To protect the external power lines of peripheral devices make sure that
- the wires have the right diameter to withstand the maximum available current.
- to enclosure of the peripheral device fulfills the fire-protecting conditions of IEC/EN 60950.
Advertising
This manual is related to the following products: