Kontron KTAM3874-pITX - Manual (Page 7)

KTD-S0051-D Page 3 Introduction
KTAM3874/pITX User's Guide
2 Introduction
2.1 pITX Embedded Line Family
Each pITX is a member of the 2.5" SBC family of KONTRON Technology A/S based on the Pico-ITX TM specifi-
cation (only mechanical outer dimensions) from the Small Form Factor Special Interest Group (SFF-SIG).
pITX embedded line modules are characterized by the same front-line pinouts and interfaces for reset logic
and simple power supply, 2 x USB, LAN, Audio, GPIOs, DVI
® or HDMI ® and LVDS interface. These embedded
line family features allow to use the same chassis over the whole product line and maximize design reuse.
These homogeneous features facilitate easy upgrades within the pITX embedded line product family.
2.2 KTAM3874/pITX Overview
Please refer to the following matrix to choose the product that suits your needs best.
Article Number SDRAM Size e.MMC Flash Comment
03005-1040-90-0 1 GByte 4 GByte Standard
03005-2040-90-0 2 GByte 4 GByte 1) On request
Note:
1)
maximal 16 GByte possible.