Kontron KTA55-pITX - Manual (Page 15)

KTD-S0043-A Page 12 SDIO/microSD Card Interface
KTA55/pITX Software Guide
Some examples:
KTA55DISP filename.kdb
Writes the DisplayID record to panel position 0 (default).
KTA55DISP -p3 filename.kdb
Writes the DisplayID record to panel position 3.
KTA55DISP -b64
Writes the backlight brightness value 64 (valid for all panel entries).
KTA55DISP -backup kta55.bin
Reads all panel records and the firmware of the DP/LVDS Monitor Controller. You can use this file to update
a lot of boards with the same configuration.
KTA55DISP -update kta55.bin
Writes all panel records and the firmware to the DP/LVDS Monitor Controller (always in context with the
backup function).
5 SDIO/microSD Card Interface
The following operating systems allow booting from a microSD card: DOS, Linux and Windows ® XP Em-
bedded Standard 7 (WES7).
5.1 DOS Boot
All standard DOS programs for partitioning and formatting can be used (e.g. FDISK.EXE and FORMAT.COM).
However it can not be guaranteed that all functions of INT13h respectively INT21h work correctly.
Condition: the microSD card is formatted as a harddisk.
The table shows a list of the tested DOS versions.
Operating System Version Result
MS-DOS 6.22 ✔
MS-DOS WIN 98 (7.10) ✔
DR-DOS 7.03 ✔