Notice, Warning – La-Z-Boy La-Z-Touch Cooler Recliner with Massage & Heat 11/27/2011 User Manual
Page 5
– To reduce the risk of serious injury:
•
Check the condition of the power transformers, electrical cords, plugs and
connectors monthly. Keep the power transformers and electrical cords away
from heat sources. Never operate the unit with a damaged power transformer,
electrical cord, plug or connector. Contact your La-Z-Boy
®
dealer for service.
•
Do not allow electrical cord to be pinched between moving parts or between the
frame and the floor. Do not place cord under carpet or in location where it could
become worn.
9
8
10. Move the cords away from the base and hold the top arm closed to prevent the cooler from
falling out. Gently return the chair to the upright position. Make sure the cords are not pinched
in moving parts or under the base.
– To reduce the risk of serious injury:
•
Provide a clear path for operation of the back and legrest. Place tables and area
rugs at a distance to allow the legrest to fully extend without rubbing or interference.
11. Choose a location for the chair that is close to an electrical outlet. Proceed to the
Operating Instructions.
12. To remove the back, unplug the power transformers from the electrical outlet and
reverse the Assembly Instructions steps.
Thermo-Electric Cooler Power
Transformer Connection
Thermo-Electric
Cooler Power
Transformer
Massage & Heat
Power Transformer
Thermo-Electric Cooler Recliner with 2-Motor
Massage & Heat Assembly Instructions
Thermo-Electric Cooler Recliner with 2-Motor
Massage & Heat Assembly Instructions
6. Identify the four electrical connectors at the back of the chair, under the seat (F
IGURE
7).
•
The two rectangular connectors are for the hand wand connection (F
IGURE
8).
•
The round connector is for the 2-motor massage and heat power transformer
connection (F
IGURE
8).
•
The black rectangular connector is for the thermo-electric cooler power transformer
connection (F
IGURE
9).
7. Align the two rectangular hand wand connectors (some of the connector pins are square,
others are round). Push the connectors together until they lock (F
IGURE
8).
8. Plug the 2-motor massage and heat power transformer into the round connector.
Make sure the connectors are securely fastened (F
IGURE
8).
9. Plug the thermo-electric cooler power transformer into the black rectangular connector
clamped to the inside arm. Push the connectors together until they lock (F
IGURE
9).
WARNING
WARNING
NOTICE:
To prevent damage to the connectors and cords, it is important
to unfasten all connections prior to removing the back.
F
IGURE
8
F
IGURE
9
F
IGURE
7
F
IGURE
10
Thermo-Electric Cooler
Power Transformer
Connector
Hand
Wand
Connectors
Massage & Heat
Power Transformer
Connectors
Massage & Heat
PowerTransformer
Connector
Hand Wand
Connectors