Operations and adjustments – Century Travel SolutionsTM Plus User Manual

Page 28

Advertising
background image

Buckle:

3-Point Models

• To buckle: Push buckle down on tongue.

Pull up on buckle to be sure it is locked.

• To unbuckle: Press red button and pull

buckle off tongue.

5-Point Models

• To buckle: Insert both tongues into

buckle. Pull up on tongues to be sure
they are locked.

• To unbuckle: Press red button and pull

harness tongues out of buckle.

Removing Car Seat from Base:

• Place handle in “locked” upright carrying

position.

• Squeeze red release lever in base (fig. b).

• Lift car seat out of base.

Adjustable Base (available on some models):

• Pull blue adjustment Handle out (fig. c).

• Adjust Foot to desired position.

• Release adjustment handle. Be sure it

retracts into slot.

Harness Tie:

2-Piece (available on some models):

• To open: Squeeze tabs and pull apart.

• To close: Snap halves together. Make

sure harness tie is locked by pulling out
on each half.

1-Piece:

• To open: Unhook harness tie from child’s

left side (fig. a) of harness strap.

• To close: From backside of harness tie,

slide harness strap over harness tie
tongue.

Adjustable Handle:

• Handle has four adjustment positions.

• Push in red buttons on each side of

handle, rotate and release red buttons.
Continue rotating handle to desired
position until you hear a “click” sound.

IMPORTANT: Before lifting car seat, place

handle in “locked” upright carrying
position.

OPERATIONS and ADJUSTMENTS

10

1

2

3

4

5

Advertising