Century Travel SolutionsTM Plus - Manual (Page 5)

4
ASSEMBLY continued
WARNING
Prevent a possible choking hazard, discard
axle protectors and polybag which contained
rear wheel parts.
CAUTION:
• Failure to install retainer cap may cause wheels to come
off of stroller.
• After wheel assembly is complete, pull on wheels to check
that they are locked into place.
Snap one end of cup holder
over stroller frame above
canopy, rotate down to
opposite side and snap in
place.
Attaching Cup Holder
WARNING
• To avoid burns, never put hot liquids in cup
holder.
• Avoid possible tipping, DO NOT place more
than 3 lbs. (1.4 kg) in cup holder.
Hub
Cap
Retainer
Cap
Wheel
Retainer Wheel
Axle
3
Secure Wheel to Axle as shown:
• Slide Wheel onto end of Axle with brake ribs facing in.
• Slide Wheel Retainer onto end of Axle. Make sure large
end of Wheel Retainer is towards Wheel. Wheel Retainer
should snap into groove on end of Axle.
• Snap wheel Retainer Cap over Wheel Retainer.
• Line up Hub Cap tabs with slots in Wheel and snap Hub
Cap in place.