Playing back a tape, We r t, Set the camcorder to play (vcr) mode – Canon Elura 65 User Manual
Page 32: Open the lcd panel, Button to stop playback
32
Playing Back a Tape
If the playback picture is distorted, clean the video heads using a Canon Head
Cleaning Cassette or a commercially available digital video head-cleaning cassette
(
143).
1. Set the camcorder to PLAY (VCR)
mode.
Set the POWER switch to PLAY (VCR) and
the TAPE/CARD switch to b.
2. Open the LCD panel.
You can also close the LCD panel with the
screen facing outward.
3. Press the ` button to rewind the
tape.
4. Press the e/a button to begin
playback.
5. Press the
3
button to stop
playback.
❍ To use the viewfinder, close the LCD panel.
❍ About the screen display: During playback, the time code gives the hours,
minutes, seconds and frames. The remaining tape time may not appear when
the time left is less than 15 seconds.
q
CAMERA
CAMERA
(VCR)
(VCR)
PLAY
PLAY
NETWORK
NETWORK
POWER
POWER
w
e
r
t
2_D82NTSC_E(13-37) 1/30/04 14:27 Page 32