Canon Elura 65 - Manual (Page 52)

52
Adjusting the Focus Manually
Autofocus may not work well on the following subjects. In such case, focus manually.
1. Set the program selector to
Q
.
2. Adjust the zoom.
When you operate the zoom after adjusting the focus, the
subject may not stay in focus. Adjust the zoom before the focus.
3. Press the FOCUS button.
“MF” appears.
4. Turn the SET dial to adjust the focus.
• Turn the SET dial up or down until the image appears focused.
• Press the FOCUS button to return to autofocus.
CARD PLAY CARD CAMERA PLAY (VCR) CAMERA
Through
dirty or wet
windows
Subjects with low
contrast or without
vertical lines
Night Scenes
Reflective
surfaces
Fast Moving
Subjects
CARD
FOCUS button
Zoom lever
SET dial
Program selector
3_D82NTSC_E(38-81) 1/30/04 14:30 Page 52