Manhattan lcd, Quick guide – Manhattan LCD HD89XX User Manual
Page 7
Section:On Screen Display Functions
6)
© 2009 Imägo Metrics LLC for Manhattan LCD Inc. - All Rights Reserved
MANHATTAN LCD
HD8900
Quick Guide
Aspect / Size :
- Fill Screen : Enable full screen expansion for lower resolution Image
- Fill to Aspect Ratio: Enable fill screen expansion for lower resolution image according to aspect ratio
Blue Only :
ON / OFF
: Turn off the "Red" & "Green" channel (i.e output all zero to Red & Green channel)
[This function will display on OSD menu when JP4 – 5-6 closed]
* : DISPLAY IN VIDEO MODE ONLY
** : FUNCTION IN ARGB/ DVI / VIDEO NTSC / HD COMPONENT MODE ONLY
#
: DISPLAY IN ARGB / DVI MODE ONLY
##
: FUNCTION IN ARGB MODE ONLY
###
: DISPLAY WHEN VIDEO ADD-ON BOARD CONNECTED
####
: DISPLAY IN VIDEO / HD/SD SDI 1 / HD/SD SDI 2 MODE ONLY
Picture Mode
Input
Input : Select the input video signal
HD/SD SDI 1• HD/SD SDI 2*** • VGA# • DVI • HD Component • Composite 1 • Composite 2*** • S-Video • SD Component
# : Press “-“ key to activate the “Auto Picture Setup” function.
PIP Setup >
PIP Source
HD/SD SDI 1 • HD/SD SDI 2 • VGA • DVI • HD Component • Composite 1 • Composite 2 • S-Video • SD Component • Off
PIP Size : OFF / Small / Medium / Large / PBP
4 possible input groups that can be mixed for PIP :
a) VGA/HD-component
b) DVI
c) HD-SDI
d) Composite/S-Video/SD-component
It can not allow to select signal source from the same group for PIP.
CONTINUED>>>