Manhattan LCD HD89XX - Manual (Page 9)

Section:On Screen Display Functions
8)
© 2009 Imägo Metrics LLC for Manhattan LCD Inc. - All Rights Reserved
MANHATTAN LCD
HD8900
Quick Guide
Setup > Selection for the corresponding input sources detection
HD/SD SDI 1
• HD/SD SDI 2 • VGA • DVI • HD Component • Composite 1
Composite 2 • S-Video • SD Component
The corresponding input port name display on OSD menu will disappear once
setting “OFF”.
De-interlacing Mode*> AFM : Auto Film Mode • TNR : Temporal Noise Reduction
MADI : Motion Adaptive De-interlacing • LADI : Low Angled De-interlacing
Auto Power : OFF / ON
ON – Enable soft power off function if absence of input signals
OFF – Disable soft power function
Video Standard (SD)* : Auto / NTSC / NTSC 4.43 / PAL / PAL M / SECAM
Image Orientation : Normal / Horizontal flip / Vertical flip / Rotate
Gamma : 1.0 / 1.6 / 2.2
OSD
OSD position :
H POS
: Move the OSD menu image horizontally
V POS : Move the OSD menu image vertically
OSD Timeout (sec) : ON – 60 : Adjust the OSD menu timeout period in a step of 5
seconds (max 60 seconds)
ON = Continuous to display OSD menu.
60 = 60 seconds later will turn off the OSD menu.
Language : English / Chinese : Select OSD menu language display
Transparency :
ON / OFF : Set OSD transparency
Freeze : Freeze the image (use “+” button)
Zoom >
Zoom level :
: Enable the zoom in function on the image displayed.
Use “+” button to zoom in the image
Use “-“ button to decrease the zoomed image
Horizontal pan : : Pan the image horizontally
Vertical pan : : Pan the image vertically
Default : Restore to default values
Note : Freeze state will be cleared when you using zoom function.
Utilities (...continued)