On-board computer and displays, Menus and submenus – Mercedes-Benz CLS-Class 2013 Owners Manual User Manual
Page 223
Switching the daytime running lamps on/
off
i
This function is not available in Canada.
X
Press the = or ; button on the
steering wheel to select the
Sett.
menu.
X
Press the : or 9 button to select the
Lights
submenu.
X
Press a to confirm.
X
Press : or 9 to select the
Day
Lights:
function.
If the
Day Lights:
have been switched on,
the cone of light and the W symbol in
the multifunction display are shown in red.
X
Press the a button to save the setting.
Further information on daytime running
lamps (
Y
page 111).
Switching Adaptive Highbeam Assist on/
off
X
Press the = or ; button on the
steering wheel to select the
Sett.
menu.
X
Press the : or 9 button to select the
Lights
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Adaptive Highbeam
function.
If the
Adaptive Highbeam
function has
been switched on, the cone of light and the
_ symbol in the upper multifunction
display are shown in red.
X
Press the a button to save the setting.
For further information about Adaptive
Highbeam Assist, see (
Y
page 116).
Setting the brightness of the ambient
lighting
X
Press the = or ; button on the
steering wheel to select the
Sett.
menu.
X
Press the : or 9 button to select the
Lights
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Amb. Light +/-.
function.
You will see the selected setting.
X
Press a to confirm.
X
Press the : or 9 button to adjust the
brightness to any level from
Off
to
Level
5
(bright).
X
Press the a or % button to save the
setting.
Setting the ambient lighting color
X
Press the = or ; button on the
steering wheel to select the
Sett.
menu.
X
Press the : or 9 button to select the
Lights
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Ambient Light Color
function.
X
Press a to confirm.
X
Press the : or 9 button to set the
color to
SOLAR
,
NEUTRAL
or
POLAR
.
X
Press the a or % button to save the
setting.
Activating/deactivating surround
lighting and exterior lighting delayed
switch-off
X
Press the = or ; button on the
steering wheel to select the
Sett.
menu.
X
Press the : or 9 button to select the
Lights
submenu.
X
Press a to confirm.
X
Press : or 9 to select the
Surround Lighting
function.
When the
Surround Lighting
function is
activated, the light cone and the area
around the vehicle are displayed in red in
the multifunction display.
X
Press the a button to save the setting.
Menus and submenus
221
On-board computer and displays
Z