Adjusting the seats electrically, Adjusting the head restraints, Seats, steering wheel and mirrors – Mercedes-Benz G-Class 2013 Owners Manual User Manual

Page 88: Seats

Advertising
background image

!

To avoid damage to the seats and the seat

heating, observe the following information:

R

keep liquids from spilling on the seats. If
liquid is spilled on the seats, dry them as
soon as possible.

R

if the seat covers are damp or wet, do not
switch on the seat heating. The seat
heating should also not be used to dry
the seats.

R

clean the seat covers as recommended;
see the "Interior care" section.

R

do not transport heavy loads on the
seats. Do not place sharp objects on the
seat cushions, e.g. knives, nails or tools.
The seats should only be occupied by
passengers, if possible.

R

when the seat heating is in operation, do
not cover the seats with insulating
materials, e.g. blankets, coats, bags,
seat covers, child seats or booster seats.

!

Make sure that there are no objects in the

footwell or behind the seats when resetting
the seats. There is a risk that the seats
and/or the objects could be damaged.

!

When the rear bench seat is folded

forwards, the front seats cannot be moved
to their rearmost position. You could
otherwise damage the seats and the rear
bench seat.

!

Make sure that the sun visor is folded up

before adjusting the backrest and head
restraint height. The head restraint and sun
visor could otherwise collide when the head
restraint is fully extended.

i

If the front door is open, the seats can be

adjusted for up 30 minutes after the
ignition has been switched off.

i

The rear-compartment head restraints

can be removed (

Y

page 88).

For more information, contact a qualified
specialist workshop.

i

You can find further information about

enlarging the cargo compartment (folding

the rear bench seat forwards) on
(

Y

page 266).

Adjusting the seats electrically

!

Make sure that the cup holder on the

center console is folded down before you
move the front-passenger seat forwards.

:

Head restraint height

;

Seat cushion angle

=

Seat height

?

Seat fore-and-aft adjustment

A

Backrest angle

i

You can store the seat settings using the

memory function (

Y

page 95).

Adjusting the head restraints

Important safety notes

G

WARNING

For safety reasons, always drive with the rear
head restraints in the upright position when
the rear seats are occupied.
Keep the area around head restraints clear of
articles (e.g. clothing) to not obstruct the
folding operation of the head restraints.

G

WARNING

For your protection, drive only with properly
positioned head restraints.
Adjust the head restraint so that it is as close
to the head as possible and the center of the

86

Seats

Seats, steering wheel and mirrors

Advertising
This manual is related to the following products: