Mercedes-Benz SL-Class 2013 Owners Manual - Manual (Page 306)

X Select Display and press W to confirm.
X Select Day Mode , Night Mode or
Automatic by turning cVd the COMAND
controller and press W to confirm.
A dot indicates the current setting.
Design Explanation
Day Mode The display is set
permanently to day
design.
Night Mode The display is set
permanently to night
design.
Automatic If the Automatic setting
is selected, COMAND
evaluates the readings
from the automatic
vehicle light sensor and
automatically switches
between the display
designs.
Time settings
General information
If COMAND is equipped with a navigation
system and has GPS reception, COMAND
automatically sets the time and date. You can
also adjust the time yourself in 30-minute
increments, but the date cannot be changed.
i If you set the time in 30-minute
increments, any time zone settings and
settings for changing between summer and
standard time are lost. Switching between
summer and standard time (
Y
page 305).
i The following navigation system functions
require the time, time zone and summer/
standard time to be set correctly in order
to work properly:
R route guidance on routes with time-
dependent traffic guidance
R calculation of expected time of arrival
i With this function, you can set the time
for every display in the vehicle.
Setting the time
X Press W.
X Select Time by turning cVd the COMAND
controller and press W to confirm.
X Select Set Time and press W to confirm.
X Set the time by turning cVd the COMAND
controller and press W to confirm.
The time is accepted.
Setting the time/date format
X
Press W.
X Select Time by turning cVd the COMAND
controller and press W to confirm.
X Select Format and press W to confirm.
The # symbols show the current settings.
X Set the format by turning cVd the
COMAND controller and press W to
confirm.
Abbreviation Meaning
DD / MM / YY Day/Month/Year
(date format)
HH / MM Hours/Minutes
(time format)
You can set the 24-hour or the AM/PM
format.
304
System settings
COMAND