Mercedes-Benz C-Coupe 2012 COMAND Manual - Manual (Page 131)

Using call lists
Introduction
COMAND displays lists of calls received
(including missed calls) and made during
phone operation. Call lists are not available
unless a mobile phone is connected to
COMAND.
COMAND supports the PBAP Bluetooth
®
profile. How COMAND processes call lists
depends on the model of the mobile phone
connected:
R Bluetooth ® telephone with PBAP
Bluetooth ® profile:
The call lists are downloaded automatically
from the mobile phone by COMAND as
soon as the mobile phone is connected to
COMAND.
R Bluetooth ® telephone without PBAP
Bluetooth ® profile:
COMAND creates the call lists from calls
dialed and received (including missed calls)
as soon as the mobile phone is connected
with COMAND.
i For Bluetooth ® telephones without the
PBAP Bluetooth ® profile, the call lists in
COMAND are not synchronized with those
on your mobile phone. These calls may or
may not be listed on your mobile phone,
depending on the model.
i If no mobile phone is connected, then the
Call Lists menu item is grayed out and
cannot be selected. If you connect a mobile
phone other than the previous one to
COMAND, the previously available call lists
and their entries will be deleted
automatically. They are still available on the
mobile phone itself.
i The respective menu item can only be
selected if calls have already been made or
received in COMAND.
Displaying missed calls in the COMAND
display is not supported by all mobile
phones.
Opening the call list and selecting an
entry
X Press the % function button.
X Select Call Lists in the telephone basic
menu by sliding VÆ and turning cVd the
COMAND controller and press W to
confirm.
A menu appears.
X Select Calls Received or Calls
Dialed using cVd and press W to
confirm.
The corresponding list appears.
List of selected phone numbers (example)
:
To close the list
; Date/time (if available), symbols (if
assigned) and telephone number of the
entry highlighted
= To call up options
i You can also call up the list of dialed calls
by pressing the 6 button when the
telephone basic menu is shown. In this
case, the list will only show phone
numbers.
X Select an entry by turning cVd the
COMAND controller.
X To dial a phone number: press W.
X To close the list: select Back and press
W to confirm or press the % button.
Using call lists
129
Telephone
Z