Emergency operation (limp-home mode), Instrument cluster, Introduction – Mercedes-Benz SLK-Class 2010 Owners Manual User Manual
Page 94: Controls in detail
the optimal gear for maximum
acceleration.
i
When you brake or stop, the automatic
transmission shifts down into a gear from
which you can easily accelerate or take off.
Kickdown
Using the kickdown while driving in manual
program mode
M is not possible.
Deactivating manual shift program
X
Press the program mode selector switch
repeatedly until
C or S appears in the
multifunction display.
or
X
Restart the engine.
The automatic transmission will go to
automatic program mode
C.
Manual program mode
M is not stored.
If vehicle acceleration becomes less
responsive or sluggish or the automatic
transmission no longer shifts, the automatic
transmission is most likely operating in limp-
home (emergency operation) mode. In this
mode only second gear and reverse gear
R
can be selected.
X
Stop the vehicle in a safe location.
X
Shift the automatic transmission into park
position
P.
X
Turn off the engine.
X
Wait at least 10 seconds before restarting.
X
Restart the engine.
X
Shift the automatic transmission into drive
position
D (for second gear) or reverse gear
R.
X
Have the automatic transmission checked
at an authorized Mercedes-Benz Center as
soon as possible.
Instrument cluster
For a full view illustration of the instrument
cluster, see “Instrument cluster”
(
No messages will be displayed if either the
instrument cluster or the multifunction
display is inoperative.
As a result, you will not be able to see
information about your driving conditions,
such as
R
speed
R
outside temperature
R
warning/indicator lamps
R
malfunction/warning messages
R
failure of any systems
Driving characteristics may be impaired.
If you must continue to drive, do so with added
caution. Contact an authorized Mercedes-
Benz Center as soon as possible.
:
To brighten instrument cluster
illumination (knob
+)
;
To dim instrument cluster illumination
(knob
-)
=
Reset button .
For information on changing the instrument
cluster settings, e.g. the language, see
(
92
Instrument cluster
Controls in detail
171_AKB; 3; 60, en-US
d2ureepe,
Version: 2.11.8.1
2009-05-11T16:00:23+02:00 - Seite 92