Mercedes-Benz C-Class 2010 COMAND Manual - Manual (Page 18)

Navi Audio Phone Video
Ç Audio Fadeout Rear
AUX
You can determine basic settings for the map
display, route calculation and route guidance
functions in
Navigation.
i You can call up functions such as
destination entry and the destination
memory at the bottom of the COMAND
display in the Navigation menu bar.
In the Audio main function, you can switch
modes in the audio menu.
In the
Phone main function, you can choose
between the telephone mode and the address
book.
In the
Video main function, you can choose
between the DVD mode and the Video Aux
mode.
Tilting and Folding COMAND Display
i The following description for tilting and
folding the display only applies to C-Class
vehicles. GLK-Class vehicles are equipped
with a fixed screen.
! Do not place any objects in front of or
behind the COMAND display and/or do not
secure any objects to the COMAND
display. Otherwise, movement could be
prevented when folding the display in/out.
You tilt the COMAND display vertically and
fold it in behind the cover. The buttons are
located centrally under the COMAND display.
1 Tilting the display
2 Folding in the display
Tilting the display
X Press button 1 once or twice.
The display tilts downwards.
X To move it back into the standard
position: Press button 1 again.
Folding in the display
X Press button 2.
The display folds in behind the cover. The
main function/mode currently selected
remains active.
Folding out the display
X Press the button on top of the display.
The display folds upwards.
Cleaning Instructions
! Do not touch the COMAND display. The
display has a very sensitive high-gloss
surface; there is a risk of scratching. Should
the display need cleaning, use a mild
cleaning agent and a soft, lint-free cloth.
16
COMAND Control System
At a Glance