Controls in detail, Driving systems – Mercedes-Benz GL-Class 2010 Owners Manual User Manual

Page 152

Advertising
background image

Immediately brake the vehicle to increase
your distance to the preceding vehicle. The
warning sound is intended as a final caution
in which you should intercede with your own
braking inputs to avoid a potentially
dangerous situation. Do not wait for the
operation of the warning signal to intercede
with your own braking. This will result in
potentially dangerous emergency braking
which will not always result in an impact being
avoided.
Tailgating increases the risk of an accident.

G

Warning!

The Distronic brakes your vehicle with a
maximum deceleration of 6.5 ft/s

2

(2 m/s

2

).

This corresponds to approximately 20% of the
maximum deceleration of your vehicle.
You must also apply the brakes yourself to
avoid a collision. The Distronic brakes the
vehicle in an effort to restore the preset
distance or to maintain the set speed. The
brake pedal is automatically applied as this
happens which results in the brake pedal
moving
Keep driver’s foot area clear at all times,
including the area under the brake pedal.
Objects stored in this area may impair pedal
movement which could interfere with the
braking ability of the Distronic system.
Do not place your foot under the brake pedal
– your foot could become caught.

Distronic menu in the control system

Use the

DISTRONIC menu to display the

current settings for your Distronic system.
The information shown in the multifunction
display depends on whether the Distronic
system and/or the distance warning function
are activated or deactivated.

i

To activate or deactivate the Distronic

system, see (

Y

page 151) or see

(

Y

page 152).

To activate or deactivate the Distance
warning function, see (

Y

page 140).

X

Press button V or U repeatedly until
one of the following two displays appears
in the multifunction display.

Distronic deactivated

When the Distronic is deactivated, you will
see the standard Distronic display in the
multifunction display.

:

Preceding vehicle, if detected

;

Actual distance to the preceding vehicle

=

Preset distance threshold to the
preceding vehicle

?

Your vehicle

Distronic activated

When the Distronic is activated :, you will
see the set speed ; in the multifunction
display for approximately 5 seconds. The
following display appears in the multifunction
display.

After approximately 5 seconds the currently
set speed ; appears in the status indicator
of the multifunction display:

R

USA only:

DTR XXX Miles

R

Canada only:

DTR XXX km/h

Cruise control lever

The Distronic system is operated by means of
the cruise control lever.

150

Driving systems

Controls in detail

X164_AKB; 5; 31, en-US
d2ureepe,

Version: 2.11.8.1

2009-09-11T12:30:16+02:00 - Seite 150

Advertising