System, see, Controls in detail, Driving systems – Mercedes-Benz GL-Class 2010 Owners Manual User Manual

Page 153

Advertising
background image

:

Setting current or higher speed

;

Setting current or lower speed

=

Deactivating the Distronic

?

Activating the Distronic or resuming to
the last set speed

Activating Distronic

You can activate the Distronic when the
vehicle speed is between 20 mph (30 km/h)
and 110 mph (180 km/h).
When the Distronic is activated, one or two
cruise control speed segments around the set
speed in the speedometer dial are
illuminated. The multifunction display will
show a message such as

DISTRONIC 55 MPH
(Canada:

DISTRONIC 90 km/h).

After approximately 5 seconds the currently
set speed appears in the status indicator of
the multifunction display:

R

USA only: e.g.

DTR 55 Miles

R

Canada only: e.g.

DTR 90 km/h

If the Distronic is not activated after the
cruise control lever is pulled in direction of
arrow ? (

Y

page 150), you will see the

message

DISTRONIC Off in the

multifunction display.
In the following cases you cannot activate the
Distronic:

R

up to 2 minutes after starting the engine

R

when you brake

R

when you have engaged the parking brake

R

when the automatic transmission is in park
position

P, reverse gear R, or neutral

position

N

R

when the ESP

®

is switched off or has

switched off due to a malfunction

The vehicle speed displayed on the
speedometer can briefly vary from the speed
setting on the Distronic system.

Setting the current speed

X

Accelerate or decelerate to the desired
speed.

X

Briefly lift the cruise control lever in
direction of arrow : or depress in
direction of arrow ; (

Y

page 151).

X

Remove your foot from the accelerator
pedal.

i

If you do not take your foot off of the

accelerator pedal and continue to
accelerate past the set speed, the following
message will appear in the multifunction
display:
DISTRONIC Override
The distance to a slower moving vehicle in
front of you will not be set. Your vehicle
speed will then be determined only by the
accelerator pedal position.

Changing the set speed

G

Warning!

Keep in mind that it may take a brief moment
until the vehicle has made the necessary
adjustments.
Increase or decrease the set vehicle speed to
a value that the prevailing road conditions and
legal speed limits permit. Otherwise, sudden
and unexpected acceleration or deceleration
of the vehicle could cause an accident and/
or serious injury to you and others.

You can increase or decrease the set speed
in 1 mph (Canada: 1 km/h) increments or in
5 mph (Canada: 10 km/h) increments.

Driving systems

151

Controls in detail

X164_AKB; 5; 31, en-US
d2ureepe,

Version: 2.11.8.1

2009-09-11T12:30:16+02:00 - Seite 151

Z

Advertising