Mercedes-Benz S-Class 2010 - Manual (Page 270)

Help window
You can use the help window to view a
selection of valid commands on the COMAND
display.
The help functions can be switched on or off
via COMAND in the
System menu
( Y page 93).
Entering digits and spelling
Entering digits
R
Digits from “Zero” to “Nine” may be used.
R
Speaking phone numbers in digit blocks of
3 to 5 digits has proven a very reliable
method for the input of phone numbers.
Spelling
R
The letters of the English alphabet and the
digits 0 - 9 may be used.
R
Speak the letters in blocks of 5 - 7 letters
at a time.
R Speak each individual letter clearly.
What to do if ...
Problem Possible cause/consequence Suggested solution
The Voice
Control
System does
not
recognize
commands. You have not operated the system
from the driver’s seat. X Operate the Voice Control System
only by the driver as the
microphone is geared to the driver
side.
You have spoken unclearly, too
loudly or too quietly. X Speak the commands in a
continuous manner using a normal
tone.
The blower could be set to the
highest setting, vents could be
pointing at microphones or wind
noise could be created due to open
windows. X Avoid loud disturbances.
268
Voice Control System troubleshooting
Control systems
221_AKB; 6; 20, en-US
d2ugruen,
Version: 2.11.8.1
2009-09-24T13:28:17+02:00 - Seite 268