Tuning to a station, Storing stations, Audio – Mercedes-Benz E-Coupe 2010 COMAND Manual User Manual
Page 127: Radio
Tuning to a Station
You can tune to a station via station search,
by manual frequency input or via the station
memory.
Tuning to a Station via Station Search
X
Rotate
y
m
z
or slide
o
m
p
when the main
area is highlighted.
or
X
Press E or F on the COMAND
control unit.
The search proceeds upwards or
downwards and stops at the next
receivable station.
Tuning to a Station via Manual
Frequency Input
X
Select
Radio£Enter Frequency in the
radio display.
An input menu appears.
or
X
Press õ on the control unit.
X
To enter a frequency: Press number
buttons on the control unit.
i
You can only select numbers that are
currently permissible.
COMAND will tune to the frequency entered.
i
If in the FM or AM wavebands you enter a
frequency outside the frequency sub-
range, COMAND will select the next
frequency down.
Tuning to a Station via the Station
Memory
X
Select
Presets in the radio display.
or
X
Press n when the main area is highlighted.
The station memory appears. The dot R in
front of a preset indicates that the currently
tuned station is stored there.
X
To select a station: Rotate
y
m
z
or slide
q
m
r
.
X
To tune to a station: Press n.
or
X
Press a number key, e.g.
4, on the control
unit.
Wavebands
Frequency
AM (MF)
530 - 1700 kHz
FM (VHF)
87.7 - 107.9 MHz
WB (Weather Band)
Weather channels
Storing Stations
There are 10 presets available for FM, AM and
SatRadio wavebands.
Storing Stations Manually
X
Press n when the main area is highlighted.
or
X
Select
Presets in the radio display.
In both cases, the station memory will
appear. The dot R in front of a preset
station indicates the station the radio is
currently tuned to.
Station memory
Radio
125
Audio
Z