Video aux, Aux connectors, Switching to video aux – Mercedes-Benz E-Coupe 2010 COMAND Manual User Manual

Page 165: Video

Advertising
background image

The way you can control the actions depends
on the DVD.

Video Aux

Aux Connectors

An external video source (Video Aux) can be
connected to COMAND via Media Interface
(

Y

page 147)1/8 inch audio/video jack

located inside the glovebox.

i

In vehicles equipped with a rear view

camera, the Video Aux connection cannot
be used for external video sources.

Switching to Video Aux

From Another Main Function

X

Select

Video£Video£Video Aux

i

If

Video Aux mode was active last, you

only need to select

Video.

Within the Video Function

X

Select

Video£Video Aux

The Video Aux menu appears. The medium
in the external video source is played,
provided it is connected and switched to
playback.

i

Please refer to the relevant operating

guide for operation of the external video
source.

Video Aux Settings

The following settings can be made in Video
Aux mode:

R

Volume (

Y

page 35)

R

Balance and fader (

Y

page 35)

R

Treble and bass (

Y

page 35)

R

Surround sound (

Y

page 36)

R

Picture (

Y

page 160)

G

Warning

Due to the different volumes of the external
audio sources, system messages (e.g.
navigation announcements) may be much
louder. You may need to disable these system
messages or adjust the volume of these
messages manually.

i

The volume of external audio sources is

extremely variable. It is possible that a
device connected as an external audio
source will sound quieter or louder in the
vehicle or that the usual maximum volume
cannot be achieved. On certain devices the
volume can be set separately. In this case,
start at a moderate volume and increase it
slowly. In this way, you can determine
whether the system is capable of playback
without distortion, even at a high volume.

Video Aux

163

Video

Z

Advertising
This manual is related to the following products: