Settings menu, Menu, Controls in detail – Mercedes-Benz C-Class 2010 Owners Manual User Manual

Page 132: Control system

Advertising
background image

operation of certain systems. They do not
replace the owner’s and/or driver’s
responsibility to maintain the vehicle’s
operating safety. Have all required
maintenance and safety checks performed on
the vehicle. Bring the vehicle to an authorized
Mercedes-Benz Center to address the
malfunction and warning messages.

X

Press button = or ; to select the
Service menu.
If conditions have occurred causing status
messages to be recorded, the number of
messages appears in the multifunction
display:

X

Press button : or 9 to select the
messages function.

X

Press button a to confirm.
The stored messages will now be displayed
in the order in which they have occurred.
For malfunction and warning messages,
see “Vehicle status messages in the
multifunction display” (

Y

page 270).

X

Use button : or 9 to scroll through
the messages.

If you turn the SmartKey in the starter switch
to position

0 and then back to position 2, all

messages will be deleted from the message
memory.

Settings menu

Introduction

In the

Settings menu there are two

functions: The function

Factory Setting

(

Y

page 130), with which you can reset the

settings to the original factory settings and a

collection of submenus (

Y

page 130) with

which you can make individual settings for
your vehicle.

Resetting to factory settings

You can reset most of the settings of the
submenus to the factory settings.
For safety reasons, the function

Daytime

Running Lamps in the Lights submenu
cannot be reset while driving.

X

Press button = or ; to select the
Settings menu.

X

Press button : or 9 to select the
Factory Setting function.

X

Press button a.
The function

Reset All Settings?

appears in the multifunction display.

X

Press button : or 9 to select Yes or
No. Select Yes if you want to reset to
factory settings.

X

Press button a to confirm.
The confirmation message appears in the
multifunction display.

Submenus in the Settings menu

X

Press button = or ; to select the
Settings menu.

130

Control system

Controls in detail

204_AKB; 5; 23, en-US
d2ureepe,

Version: 2.11.8.1

2009-07-16T17:54:06+02:00 - Seite 130

Advertising
This manual is related to the following products: