Usa only), The standard display, Lighting submenu – Mercedes-Benz CLS-Class 2009 Owners Manual User Manual

Page 137: Only), Controls in detail

Advertising
background image

Control system

135

X

Press button

æ

or

ç

to select the

status line to Speed or Outside Temp..
You will see the status line display when
you have called up a different display from
the standard display.

Selecting display (speed display or out-

side temperature) for standard display

X

Move the selection marker with button

æ

or

ç

to the Instr. Cluster sub-

menu.

X

Press button

j

or

k

repeatedly until

the message Basic Display appears in
the multifunction display.
The selection marker is on the current set-
ting.

X

Press button

æ

or

ç

to select the

display shown in the standard display.
The other display now appears in the
Standard display menu (

Y

page 126).

Lighting submenu

Access the Lighting submenu via the Set-

tings menu. Use the Lighting submenu to
change the lamp and lighting settings on your
vehicle.
The following functions are available:

R

Setting daytime running lamp mode (USA
only) (

Y

page 135)

R

Setting locator lighting (

Y

page 136)

R

Setting ambient lighting (

Y

page 136)

R

Setting night security illumination
(

Y

page 136)

R

Setting interior lighting delayed shut-off
(

Y

page 137)

Setting daytime running lamp mode (USA

only)

X

Move the selection marker with button

æ

or

ç

to the Lighting submenu.

X

Press button

j

or

k

repeatedly until

the message Headlamp Mode appears in
the multifunction display.
The selection marker is on the current set-
ting.

X

Press button

æ

or

ç

to select man-

ual operation (Manual) or daytime running
lamp mode (Constant).

With daytime running lamp mode activated
and the exterior lamp switch in position

M

or

U

, the low-beam headlamps are

switched on when the engine is running.
In low ambient light conditions the following
lamps will come on additionally:

R

Parking lamps

R

Tail lamps

R

License plate lamps

R

Side marker lamps

For more information on the daytime running
lamp mode, see “Lighting” (

Y

page 96).

For safety reasons, resetting all the functions
of all submenus to the factory settings while
driving (

Y

page 132) will not deactivate the

daytime running lamp mode.

Controls in detail

Z

Advertising