Windshield wipers – Mercedes-Benz SLK-Class 2008 Owners Manual User Manual

Page 57

Advertising
background image

56

Getting started

Driving

̈

Press the combination switch in
direction of arrow

1 or 2.

The corresponding turn signal indicator
lamp

K or L in the instrument

cluster flashes (

page 26).

The combination switch resets auto-
matically after major directional chang-
es.

Windshield wipers

The combination switch is located on the
left of the steering column.

Combination switch

1 Single wipe

Wiping with windshield washer fluid

2 Switching on windshield wipers

̈

Switch on the ignition (

page 37).

i

To signal minor directional changes such as

changing lanes, press combination switch only
to point of resistance and release. The corre-
sponding turn signals will flash three times.

!

Do not operate the windshield wipers when

the windshield is dry. Dust that accumulates on
a windshield might scratch the glass and/or
damage the wiper blades when wiping occurs on
a dry windshield. If it is necessary to operate the
windshield wipers in dry weather conditions,
always operate the windshield wipers with
windshield washer fluid (

page 58).

!

If anything blocks the windshield wipers

(leaves, snow, etc.), switch them off
immediately.

ț

For safety reasons, stop the vehicle in a safe
location, turn off the engine and remove the
SmartKey from the starter switch before
attempting to remove any blockage.

ț

Remove blockage.

ț

Turn the windshield wipers on again.

If the windshield wipers fail to function at all with
the combination switch in position I,

ț

set the combination switch to the next
higher wiper speed

ț

have the windshield wipers checked at the
nearest authorized Mercedes-Benz Center

Advertising