Headlamps:switching off, Smartkey:turning off engine, Releasing seat belts – Mercedes-Benz SLK-Class 2008 Owners Manual User Manual

Page 62: See “turning off engine, Turning off engine

Advertising
background image

61

Getting started

Parking and locking

Switching off headlamps

̈

Turn the exterior lamp switch to

M

(

page 109).

Turning off engine

̈

Manual transmission: Move the gear-
shift lever into first or reverse gear.

̈

Automatic transmission*: Place the
gear selector lever in position P.

̈

Apply the parking brake (

page 59).

̈

Turn the SmartKey in the starter switch
to position 0 and remove the SmartKey
from the starter switch.

The immobilizer is activated.

Releasing seat belts

̈

Press the seat belt release button
(

page 49).

Allow the retractor to completely
rewind the seat belt by guiding the
latch plate.

i

Always set the parking brake in addition to

shifting into first or reverse gear (automatic
transmission*: gear selector lever in position P).

When parked on an incline, also turn the front
wheels towards the road curb.

i

Vehicles with automatic transmission*: The

SmartKey can only be removed from the starter
switch with the gear selector lever in position P.

!

Make sure the seat belt retracts fully so that

the seat belt and/or latch plate cannot get
caught or pinched in the door or in the seat
mechanism. This can damage the seat belt and
impair the effectiveness of the seat belt, and/or
cause damage to the door and/or door trim
panel. Such damage is not covered by the
Mercedes-Benz Limited Warranty.

Damaged seat belts must be replaced. Contact
an authorized Mercedes-Benz Center.

Advertising