285 operation – Mercedes-Benz SL-Class 2008 Owners Manual User Manual

Page 286

Advertising
background image

285

Operation

Engine compartment

̈

If necessary, add engine oil.

For information on adding engine oil, see
(

page 286).

For more information on engine oil, see the
“Technical data” section (

page 457) and

(

page 460).

Other display messages

If the SmartKey or the KEYLESS-GO*
start/stop button is not in position 2, the
following message will appear:

Turn ignition on
to measure
engine oil level

.

̈

Switch on the ignition (

page 40).

If you see the message:

Observe
Waiting Time

̈

If the engine is at operating tempera-
ture, wait 5 minutes before repeating
the check procedure.

̈

If the engine is not at operating temper-
ature yet, wait 30 minutes before re-
peating the check procedure.

If you see the message:

Engine Oil Level
Not With
Engine Running

̈

Turn off the engine.

̈

If the engine is at operating tempera-
ture, wait 5 minutes before checking
oil.

̈

If the engine is at operating tempera-
ture yet, you must wait 30 minutes be-
fore checking oil.

If there is excess engine oil with the engine
at normal operating temperature, the
following message will appear:

Engine Oil Level
Reduce Oil Level

̈

Have excess oil siphoned or drained
off. Contact an authorized
Mercedes-Benz Center.

For more information on messages in the
display concerning engine oil, see the
“Practical hints” section (

page 388).

!

Excess oil must be siphoned or drained off.

It could cause damage to the engine and
emission control system not covered by the
Mercedes-Benz Limited Warranty.

Advertising