Mercedes-Benz CLK-Class 2008 COMAND Manual - Manual (Page 51)

51
Audio
Radio operation
On the memory list
̈ Activate the desired wave band
(
୴ page 46).
̈ Press the Presets soft key.
The memory Preset menu will appear.
̈ Push the joystick to H, h or g,
G to highlight the desired memory
preset.
̈ Press E longer than 2 seconds.
You will hear a verification beep if the
beep tones option was activated in the
system settings (
୴ page 209).
The current station will be saved at the
memory preset selected.
You will see the Radio main menu
ț automatically after 8 seconds
ț if you press the Back soft key.
Saving stations automatically (FM, AM)
̈ Activate the desired wave band
(
୴ page 46).
̈ Press the Autost. soft key.
The autostore preset menu will appear.
̈ Press E to start Begin new search .
The autostore function is active. The
message
Autostore being
reloaded will appear. The radio
stores the 10 stations with the
strongest signal. The station
frequencies available will appear in the
memory list.
୴୴
i
There are 2 presets for each of the FM
and AM waveband
ț standard FM/AM presets (saving
stations manually) and
ț Auto presets (saving stations
automatically).
The standard FM/AM presets are not
affected by the Auto presets. This is a
second option for storing a station
range you are currently receiving.