Steering wheel gearshift control – Mercedes-Benz SLK-Class 2006 Owners Manual User Manual

Page 166

Advertising
background image

165

Controls in detail

Automatic transmission*

Steering wheel gearshift control
one-touch gearshifting

The steering wheel gearshift control pro-
vides an alternative method for changing
the gears manually and limiting or extend-
ing the gear range for automatic shifting
with the gear selector lever in position D
and driving in the automatic program
mode C or S.

Steering wheel gearshift control*
SLK 280, SLK 350

The steering wheel gearshift buttons are
located to the left and right of the steering
wheel.

1 Button, inside: downshift
2 Button, outside: upshift

i

To avoid overrevving the engine when
downshifting with steering wheel
gearshift buttons, the transmission will
not shift to a lower gear if the engine’s
max. speed would be exceeded.

!

Allow engine to warm up under low
load use. Do not place full load on the
engine until the operating temperature
has been reached.

Shift into reverse gear R or parking
position P only when the vehicle is
stopped.

Avoid spinning of a drive wheel for an
extended period when driving off on
slippery road surfaces. This may cause
serious damage to the drivetrain which
is not covered by the Mercedes-Benz
Limited Warranty.

Advertising