Mercedes-Benz G-Class 2006 Owners Manual - Manual (Page 191)

190
Controls in detail
Loading
Installation behind rear seat bench
1 Partition net
2 Mounting
̈ Fold the rear seat bench forward
(
୴ page 188).
̈ Hook partition net 1 in mountings 2
on both sides.
3 Lift tensioner
4 Tie down
Lift tensioner 3 on tie downs 4 must
point in the direction of the arrow.
5 Hook
6 Ring
̈ Set the length of the tie downs 4 and
lift tensioner 3 to the rings 6.
̈ Insert tie down hooks 5 in rings 6.
Pull on loose ends of tie downs until net
is slightly tensioned.
̈ Fold up seat bench until it locks in
place.
The partition net will be tightened by
the rear seat bench cushion.
After driving a short period, check the ten-
sion of the partition net, retighten if neces-
sary.
i
This cannot be done by folding the rear
seat backrest forward.