Mercedes-Benz G-Class 2006 Owners Manual - Manual (Page 341)

340
Practical hints
Replacing bulbs
High and low beam bulb
̈ Remove protection cover 1.
̈ Pull off electrical connector 3.
̈ Unclip retainer spring 4.
̈ Remove bulb 5.
̈ Insert the new bulb so that its socket
locates in the recess of the lamp
housing.
̈ Clip on retainer spring 4.
̈ Plug electrical connector 3 onto
bulb 5.
̈ Reinstall protection cover 1.
Parking and standing lamp bulb
̈ Pull off electrical connector 2 from
bulb socket 6.
̈ Turn bulb socket 6 counterclockwise
out of the lamp housing.
̈ Insert a new bulb into bulb socket 6.
̈ Insert bulb socket 6 into the lamp
housing and turn clockwise until it
engages.
̈ Plug electrical connector 2 onto bulb
socket 6.
Front fog lamp
Right front fog lamp, left front fog lamp
laterally reversed
1 Securing screw (trim panel)
2 Front fog lamp trim panel
3 Front fog lamp