Crosley W10223589B - Manual (Page 4)

4
4. (OPTIONAL) If your dryer has a Temperature selector, set it to
the recommended setting for the type of fabric being dried.
See Dryer Cycle Descriptions (separate sheet) for temperature
suggestions. On some models, temperature is included in the
cycle selections.
5. (OPTIONAL) Your dryer may have a WRINKLE PREVENT
setting. When you are unable to remove a load from the dryer
as soon as it stops, wrinkles can form. This feature
heat to help avoid wrinkling.
6. (OPTIONAL) Your dryer may have an End of Cycle Signal as
part of the Push To Start button. This signal is helpful when
drying items that should be removed from the dryer as soon
as it stops. Turn the PUSH TO START button to ON or OFF.
The signal will sound only if the selector is set to On.
7. If desired, add fabric softener sheet. Follow package
instructions.
8. Press PUSH TO START.
Stopping and Restarting
You can stop your dryer anytime during a cycle.
To stop your dryer
Open the dryer door or turn the Cycle Control knob to OFF.
NOTE: The Cycle Control knob should point to an Off area when
the dryer is not in use.
The drying time for an Auto-Sense Dry Cycle depends on load
type and load size. When drying a large or heavy load, the Cycle
Control Knob may take a long time before it begins to advance
into Cool Down. The Auto-Sense Dry Cycle takes the guesswork
out of drying time and enhances fabric care. The amount of time
that is displayed is the estimated time remaining in the cycle.
Drying Rack Option
Use the Drying Rack to dry items such as sweaters and pillows
without tumbling. The drum turns, but the rack does not move.
If your model does not have a drying rack, you may be able to
allows drying rack usage and for ordering information, please refer
to the front page of the manual or contact the dealer from whom
you purchased your dryer.
NOTE: The rack must be removed for normal tumbling. Do not
use the automatic cycle with the drying rack.
To use the drying rack
1. Place drying rack in dryer.
Style 1: Your drying rack has front legs. Slide rear pegs into
the dimples on the back wall of the dryer. Lower the front legs
to rest on the dryer opening.
How Auto-Sense Dry Plus Works
When you are using the Auto-Sense Dry Plus Cycle, the dryness
of the load is determined by two metal strips (sensors) located on
the inside of the dryer. The metal strips help "feel" the amount of
moisture left in the clothes as they pass. When there is moisture
left in the clothes, the Cycle Control Knob will not advance. As
clothes begin to dry, the amount of water left in the clothes
decreases, and the timer advances through the remainder of the
cycle. When the selected dryness level is reached, the dryer goes
into a cool down period of up to 10 minutes.
2. Load clothes loosely into the dryer and close the door. Do not
pack the dryer. Allow space for clothes to tumble freely.
3. Turn the Cycle Control knob to the recommended cycle for the
being dried. Use the Energy Preferred Automatic
Setting to dry most heavy to medium weight fabrics.
This booklet covers several different models. Your dryer may
not have all the cycles and features described.
Before using your dryer, wipe the dryer drum with a damp cloth to
remove dust from storing and shipping.
1. Clean lint screen before each load. See “Cleaning the Lint
Screen.”
DRYER USE
Starting Your Dryer
WARNING
Explosion Hazard
gasoline, away from dryer.
Do not dry anything that has ever had anything
Failure to follow these instructions can result in death,
WARNING
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Items containing foam, rubber, or plastic must be dried
on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in death
5. Clean exhaust vent periodically, depending on use, but at
least every 2 years, or when installing your dryer in a new
location. When cleaning is complete, be sure to follow the
product check.
4. Use clamps to seal all joints. Exhaust vent must not be
connected or secured with screws or other fastening devices
that extend into the interior of the duct and can catch lint. Do
not use duct tape.
How Auto-Sense Dry Works
During the Auto-Sense Dry Cycle, the exhaust temperature of the
dryer determines the drying time and dryness levels. A thermostat
signals the Cycle Control Knob when to move into Cool Down.
To restart your dryer
Close the door. Select a new cycle and temperature (if desired).
Press PUSH TO START.
purchase one for your model. To find out whether your model
periodically tumbles, rearranges, and fluffs the load without
type of load
or fire.
explosion, or fire.
flammable on it (even after washing).
Keep flammable materials and vapors, such as
Installation Instructions supplied with your dryer for final