Creek Audio Evolution 2 - Manual

EVOLUTION 2
COMPACT DISC PLAYER
DESIGNED AND ENGINEERED
IN THE UNITED KINGDOM
OPERATING INSTRUCTIONS
Congratulations on your purchase of Creek’s EVOLUTION 2 Compact Disc Player. Please read this
manually thoroughly. It will explain in detail the features and operation of your EVOLUTION 2 CD Player
and help to ensure a trouble free installation. Unpack the player carefully. It is recommended that you
save the carton and packing material for future use, should you need to move your player or return it for
service. Your EVOLUTION 2 CD Player is designed to work in a horizontal position. It is important to allow
at least 5 cm of space behind the unit for adequate ventilation. To avoid damage, never place it near
radiators, in front of heating vents, in direct sunlight or in an excessively humid or dusty location.
SAFETY INFORMATION
This CD player is designed to operate on 220-240 Volts 50 Hz AC or 110-120 Volts 60 Hz AC.
The equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in residential installations.
TO ACHIEVE MAXIMUM PERFORMANCE FROM YOUR CD PLAYER
Install the equipment in a location which is relatively free of moisture and dust, and is well ventilated.
The equipment may not be able to perform at its best in an extremely cold or hot environment. Do not
o o o o
attempt to use below 41 F/5 C or above 95 F/35 C.
Always handle discs with clean hands.
Avoid using scratched discs.
Do not attempt to clean the CD player or discs with chemical solvents, as this may cause irreparable
damage. Use a clean, dry cloth, or specially designed cleaning materials for discs.
If the CD player malfunctions, do not open the unit and attempt to repair it yourself. This is a highly
technical product and requires specialist service - return it to your dealer.
Use batteries (2 x AAA) of the same type in the remote control handset. The use of odd or different type
cells will affect its performance. Batteries are supplied.
Keep this manual in a safe place for reference.
POWER
The mains On/Off switch is located on the front panel. Press this button to turn the player on or off. It
should be noted that the power button on the remote handset will not turn the player on or off.
DISPLAY
Display brightness can be adjusted by pressing the DISPLAY button on the EVOLUTION 2 remote
handset.