Creek Audio Evolution 2 - Manual (Page 3)

PROGRAMMING DISC PLAY
This feature is available only via the remote handset.
This feature allows you to play tracks in your preferred sequence. It is not possible to programme the CD player while
the disc is playing. Press the STOP button first, then enter a program.
To program a desired sequence of tracks, follow these steps:
Press the PROG button on the remote control handset and the display on the CD player will flash ‘P’.
Select your desired first track buy using the numeric buttons on your remote handset.
Press the PROG button on the remote handset. This stores the track.
Repeat this process starting once more by pressing the PROG button until all desired tracks are stored.
When finished, press PLAY and the tracks will be played in the stored sequence. When playing, the letter M will appear
on the display between the track number and the elapsed time of the track playing.
Pressing Open/Close clears the memory.
REPEAT FUNCTIONS
This function is available only via the remote control handset.
Make sure that the PROGRAM function has not been selected.
Press the REPEAT button once and the letter T will appear in the display Select the desired track and the track number
will appear on the display. Press the PLAY button. The track will be repeated.
Press the REPEAT button a second time and the letter A will appear in the display. All the disc will be repeated.
Press the REPEAT button a third time and the letter B will appear. A sample between A & B will be repeated.
Press the REPEAT button a fourth time or OPEN/CLOSE and the player will revert to normal play.
TROUBLESHOOTING
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION
No power Poor power plug connection at the Insert the power plug firmly into the AC outlet.
AC outlet or IEC inlet. Check the IEC inlet connection.
No sound Improper output cable connections. Connect the output cable properly.
Improper amplifier operation. Make sure the amplifier controls are set
Amplifier muted. correctly.
Disc skips Dirty or scratched disc. Clean or replace with a new disc.
CD player is subject to vibrations. Change the location of the player.
Remote handset will Batteries low. Replace the batteries
not function
EVOLUTION 2 COMPACT DISC PLAYER OPERATING INSTRUCTIONS
Page Three