Pizzacraft PM6011 Pizza Oven Leg Kit - Manual (Page 2)

HARDWARE PACKAGE CONTENTS:
1. M6x12 Phillips screws (4) - for legs
2. M4x25 Phillips screws (6) - for leg supports
3. M6 Carriage bolts (4) - for tank ring assembly
4. M6x8 Nuts (4) - for tank ring assembly
5. Thumb screw (1) - for securing propane tank
6. M6x10 Hex screws (4) - for securing legs to oven
7. M6 washer (4) - for Hex screws
8. 5mm Hex wrench (1) - to tighten Hex screws
2
9.
1.
6. 8. 7.
2. 3. 4. 5.
8.
7.
6.
5.
4.
3.
1.
2.
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
and hardware contents list. Do not discard package materials before assembly is complete. If any part is miss-
ing or damaged, do not attempt to assemble the product. Call customer service at 800.521.0505.
To watch assembly video go to companion-group.com/pizzeria-pronto/assembly/
Estimated assembly time: 30 minutes
ASSEMBLY INSTRUCTIONS
Tools required- #2 Phillips screwdriver, 10mm wrench and rubber mallet/wood block, NOT
INCLUDED. 5mm hex wrench, INCLUDED.
PACKAGE CONTENTS:
1. Utility bar (1)
2. S hooks (3) for utility bar
3. Upper leg (4)
4. Lower leg (4)
5. Hardware package (1)
6. Lower leg caps (4)
7. Bottom frame (2)
8. Tank ring frame (4)
9. Tank ring (1)
- front 2 have slots for utility bar