Plastec Adjustable Dampers - Manual (Page 2)

PL ASTEC VENTILATION, INC.
Installation, Operation & Maintenance Manual
GENERAL INSTRUCTIONS
INTRODUCTION
DO NOT INSTALL, USE OR OPERATE THIS EQUIPMENT UNTIL THIS MANUAL HAS BEEN
READ AND UNDERSTOOD. RETAIN THESE INSTRUCTIONS FOR FUTURE USE.
THESE INSTRUCTIONS ARE INTENDED TO SUPPLEMENT GOOD GENERAL PRACTICES FOR
THE VARIOUS STYLES OF PLASTEC FANS AND BLOWERS. DETAILED INSTRUCTIONS WILL
BE PRESENTED SEPARATELY.
IT IS THE RESPONSIBILITY OF THE USER / PURCHASER TO ASSURE THE INSTALLATION,
OPERATION, AND MAINTENANCE OF THIS EQUIPMENT IS CARRIED OUT BY EXPERIENCED
AND QUALIFIED PERSONNEL IN THIS TYPE OF WORK.
CONTACT YOUR LOCAL REPRESENTATIVE FOR ANY FURTHER INFORMATION REQUIRED.
SHIPPING & RECEIVING
All fans and blowers have been thoroughly inspected before shipment. Unless otherwise noted.
All fans and blowers are test run and approved prior to shipment.
THE RECEIVER MUST NOTE ANY DAMAGE ON THE CARRIER’S BILL OF LADING AND FILE A
CLAIM IMMEDIATELY WITH THE FREIGHT COMPANY.
Keep a record of all equipment received including inspection details and date of receipt.
Contact your sales representative for replacement service.
HANDLING
Handle your equipment with caution using proper equipment and safety procedures.
STORAGE
Store fans in a clean, dry location prior to installation to protect against the weather and
corrosive atmospheres. If it is necessary to store equipment outdoors, protect from the
elements as much as possible. Keep equipment dry and clean. Cover inlets/outlets to
prevent collection of moisture, dust, etc.
For equipment stored for extended periods of time (1 month), rotate motor bearings.
Records of stored equipment should be kept to assure proper procedures.
– 1 –
July 2012