Plastec 50 - Manual (Page 2)

INTRODUCTION
DO NOT INSTALL, USE OR OPERATE THIS EQUIPMENT UNTIL
THIS MANUAL HAS BEEN READ AND UNDERSTOOD.
The installer assumes ultimate responsibility for ensuring that
current installation regulations are fully observed and that the
exhaust fan receives adequate protection from adverse electrical,
mechanical, thermal or environmental conditions.
The fan must be regularly inspected and maintained by qualified
staff in order to avoid damage and accidents. Material damage
and personal injuries can result from improper service.
Fan must not be installed near working or common areas. The
fan must always be installed in such a way that rotating parts
cannot be touched.
Products must be stored in a clean dry place protected from
temperature fluctuations. If it is necessary to store equipment
outdoors, protect from the elements as much as possible. Keep
equipment dry and clean.
Please, carefully follow the instructions set out below.