Plastec 50 - Manual (Page 4)

2. ELECTRICAL CONNECTION
The guidelines and safety instructions of the motor manufacturer must be strictly
adhered to. The motor should be wired to the electrical supply in accordance with
the connection diagram within the terminal box.
Please note the performance data on the motor plate.
It is essential that the motor should be protected from electrical overload.
THREE PHASE WIRING
W2 U2 V2
W1 U1 V1
L1 L2 L3
Motor
To Inverter
The electrical installation may only be carried out by an authorized electrician in
accordance with the regulations.
The electrical connection must be permanently secured. Make safe ground connections.