Power Plate pro7 - Manual (Page 11)

This button takes you to the users’ login screen. It is broken down into 2 areas
• New Users •
Existing User
The setting module is reserved for the
commercial facility manager. It will be ac-
cessible via a private button and login.
User name: admin
Password: Asyn086Si
This button takes you to the setting
module. The settings are broken down
into 4 areas
• Machine Configuration
• Education/Help
• Service Menu
• Contact
I.1.2 User login
I.1.3 Settings
Set Login Settings
Power Plate has three parameters to increase the intensity of the machine:
frequency, amplitude and duration of the exercise expressed in seconds. This last
parameter does not directly influence the intensity felt by the user but the duration of
the exercise.
Intensity level
The intensity on the machine can be determined by multiplying frequency and
amplitude. The platform of the Power Plate accelerates with a certain speed caused
by the selected frequency and amplitude. Acceleration is expressed in meters per
Second Square (m/s2) and can be converted to g-forces. An acceleration of 9.81
m/s2 equals a g-force of 1g.
Setting G-factor™
25 Hz – Low
0
30 Hz - Low 1
35 Hz - Low 2
40 Hz – Low 3
30 Hz – High 4
35 Hz – High 5
40 Hz – High 6
45Hz – High 7
50 Hz - High 8
Only the Manual Mode allows a user to set the G-Factor in any level of the complete
range (G0 to G8). G-Factor range for all other mode of exercising have been set to
maximize your results for each exercise under each user level.
Parameters
18 of 22 19 of 22